For architects

Design to the slope that's really there

On a mountain lot, a few feet of grade decides where the foundation steps, where the driveway can go, and what the windows look at. LiDAR puts the whole site in front of you in detail before the first sketch is fixed.

The challenge

Common gaps in early site information

  • The topo covers the building envelope but not the driveway, the drainage path, or the trees that frame the view.
  • Contours from public sources are too coarse for steep lots.
  • Your clients struggle to read 2D plans and can't picture the house on the hill.

The difference

What your design team works with

Detail on steep ground

Dense ground returns on slopes and under canopy give you contours to design foundations and access around.

Trees and canopy

Canopy extents and heights inform siting, solar access, view corridors, and wildfire mitigation planning.

Orthophoto base

A current, high-resolution aerial image to scale, aligned with your topography.

3D context for clients

Optional photo-real 3D reality models (TopoVision®) put your design in its setting for presentations.

Typical projects

Where it fits

  • Custom homes on mountain lots
  • Building pad and driveway feasibility
  • Site planning for multi-building projects
  • View and solar studies
  • Park and public space redesign
  • Additions where existing grade is uncertain

Colorado sites like yours

  • Topographic mapping, Mt. Princeton homesite
  • Site development mapping, Green Mountain Falls
  • Existing conditions mapping, McPhelemy (Lakeside) Park
  • Residential development survey, Chaffee County
See the full portfolio

Questions

Questions from architects

What formats work with architectural software?

Contours and linework are delivered as DXF and GeoPackage, and the point cloud as LAS/LAZ. 3D reality models are delivered as Gaussian Splats for visualization and design context.

Do I still need a surveyor?

For boundaries, easements, and setbacks, yes. A licensed partner from the network can be coordinated to provide those alongside the LiDAR topography.

Can existing buildings be mapped?

Roof outlines and ground-level footprints are visible from the air. Interior and detailed facade surveys are outside this service.

Next step

Get answers about your site

Share a location and what you need to decide. You'll get a feasibility check, a scoped LiDAR quote, and help lining up a licensed surveyor if you need one.