For civil engineers

Start design on a surface that already matches the ground

Roadway, drainage, and grading design all begin with existing ground. Get it as a Civil 3D-ready TIN in your project's ground-scaled survey coordinates, checked against independent shots and backed by a licensed Colorado surveyor.

The challenge

The bottleneck is usually the base map

  • A conventional topo crew on a long corridor or a steep, wooded parcel can take weeks, and your schedule slips before design even starts.
  • Public elevation data is fine for planning but rarely tight enough for final grading, and it arrives in the wrong coordinate system.
  • When a base surface shows up without documentation, your team inherits the risk of finding the problem later.

The difference

What your design team gains

Breaklines where they matter

Grade breaks, flow lines, toes, and tops are enforced in your TIN, so ditches and curbs don't get smoothed away.

Construction layout ready

Your surface arrives in the project's ground-scaled survey coordinates, so your design can be staked out without shifting or rescaling.

Reviewed before it reaches you

Every surface is checked against independent survey shots and reviewed by the surveyor of responsible charge before your team receives it.

A licensed surveyor in the loop

No surveyor on the job? A partner Colorado PLS sets your control and provides oversight and a stamped deliverable.

Typical projects

Where it fits

  • Road alignment and 30% design surveys
  • Drainage studies and channel assessments
  • Site grading and detention pond design
  • Trail and utility corridor planning
  • Pedestrian crossing and intersection improvements
  • Guardrail and slope repair in canyon terrain

Colorado engineering projects like yours

  • Transportation design survey, City of Loveland
  • Road design mapping, Town of Johnstown
  • Road alignment 30% design survey, Weld County
  • Pedestrian crossings design, City and County of Denver
  • Emergency guardrail replacement survey, US-36 canyon highway
See the full portfolio

Questions

Questions from engineers

Can the deliverable match our Civil 3D template and coordinate system?

Yes. Surfaces arrive as LandXML along with a 3D CAD package in your project's survey coordinates and units. Share your template, and layers and naming are matched where practical.

How does LiDAR compare with a conventional ground topo?

LiDAR captures far more ground points across your whole site and sees through gaps in vegetation, which helps on large or steep sites. A ground crew still adds value at hard features like pipe inverts and pavement edges, and the two approaches combine well.

Who certifies the survey?

Either your own surveyor, or a licensed partner from the Colorado network who sets control, reviews the work, and stamps your final deliverable.

Next step

Get answers about your site

Share a location and what you need to decide. You'll get a feasibility check, a scoped LiDAR quote, and help lining up a licensed surveyor if you need one.