How it works
Who does what, from first call to final files
Every drone LiDAR survey involves three participants: you, the Colorado LiDAR team, and a licensed land surveyor. Here's what each does at every stage, so you always know what to expect.
-
01
Scoping
Share the location, a rough boundary, and what you need to decide or design.
Airspace, terrain, vegetation, and access are checked, and deliverables are recommended so you pay only for what you need.
Reviews the control plan and any boundary needs when coordinated through the partner network.
-
02
Agreement and schedule
Approve your quote and confirm site access.
Flight plans and FAA authorizations are prepared, and your flight is scheduled around weather and snow.
Schedules control and check-shot work to line up with the flight.
-
03
Field day
Nothing, unless you'd like to watch.
Your LiDAR mission is flown with RTK/PPK positioning. Small sites usually take half a day or less.
Sets ground control and collects independent check shots on your project datum.
-
04
Processing and QC
Nothing.
Your data is tied to the surveyor's control in ground-scaled survey coordinates, ground is classified, breaklines are extracted, and the surface is built and checked.
Reviews the QC report: check-shot accuracy and flagged areas.
-
05
Delivery
Receive final, reviewed deliverables from the surveyor of responsible charge. Your design starts in the same coordinates it will be staked out in.
Surfaces, contours, imagery, and the QC report are shared with the surveyor of responsible charge for review.
Reviews the files and prepares the final deliverables, stamped when a certified survey is part of the scope.
Helpful to have
What to include with your request
None of these are required to start a conversation, but each one speeds up your quote.
- Address, parcel number, or a KMZ/shapefile of the area
- What the data is for: design, planning, purchase, permitting, grants
- Whether you already have a surveyor or need one
- Any coordinate system or CAD standards your team uses
- Deadlines, plus known access or airspace constraints
When a flight isn't possible
Your project can usually still move forward
Snow cover, restricted airspace, or a tight deadline can rule out a new flight. For undisturbed sites, existing public USGS LiDAR can often be tied to your surveyor's control as a practical alternative. You'll get an honest recommendation on which option fits.
Colorado-specific planning
Mountain weather, snowpack, wildfire season, and controlled airspace near Front Range airports and military installations all affect scheduling. They're checked before you get a quote, not on the morning of the flight.
Next step
Get answers about your site
Share a location and what you need to decide. You'll get a feasibility check, a scoped LiDAR quote, and help lining up a licensed surveyor if you need one.