Drone LiDAR topographic surveys · Colorado

Know the ground before you design, plan, or buy.

Detailed terrain mapping for Colorado engineers, planners, architects, and landowners, with a licensed land surveyor coordinated for you and files your team can use on day one.

Powered by+ a statewide network of licensed land surveyors
2017LiDAR experience behind your data since
PLSLicensed surveyor partners for your project
Layout-readyGround-scaled survey coordinates for stakeout
Part 107FAA-certified remote pilots on your site

Powered by TopoMatters

One request. Flight, processing, and surveyor coordination handled for you.

Most people who need terrain data don't want to manage three vendors. You make one request. Flight planning, processing, and a Colorado-licensed surveyor for the parts of the job that require a license are all coordinated for you.

  • Already have a surveyor? Keep them.
  • No surveyor? One is coordinated for you.
  • Either way, your data is in survey coordinates, ready for construction layout.
About the partnership
  1. You

    Engineer, planner, architect, or owner

    • Share the site and the decision
    • Get your surveyor coordinated
  2. Colorado LiDAR

    Powered by TopoMatters

    • Airspace and flight planning
    • LiDAR flight, processing, and QC
    • Files to your surveyor for review
  3. Licensed surveyor

    Colorado PLS partner

    • Ground control and check shots
    • Professional oversight
    • Final deliverables to you, stamped when required

How it works

From a map pin to finished files in four steps

  1. Share your site

    Send an address, parcel number, or KMZ and what you need to decide. Airspace, terrain, and access are checked before you get a quote.

  2. Get your surveyor lined up

    Keep your own surveyor, or get a licensed partner from the Colorado network to set ground control and provide oversight.

  3. Your site is flown and processed

    A drone LiDAR flight captures your site, usually in half a day or less for small parcels. Processing turns millions of points into a clean ground surface.

  4. Final files from your surveyor

    Your licensed surveyor reviews the data and delivers final surfaces, contours, and imagery in the formats your engineer, planner, architect, or GIS team already uses.

The full process

Why LiDAR

Built for Colorado terrain

  • See the ground under the trees

    Each laser pulse can return several times as it passes through branches, so more of it reaches bare earth than a camera ever could. That matters in Colorado's pine, aspen, and scrub oak.

  • Cover large sites in hours

    Steep slopes, long corridors, and large parcels get mapped without weeks of walking with a rod.

  • Keep people off dangerous slopes

    Canyon walls, highway shoulders, river banks, and loose talus are captured from the air.

  • Answer tomorrow's questions too

    Your point cloud stays useful later, when someone asks about a feature nobody thought to measure.

What you receive

Files your whole team can open

All deliverables

LandXML, Civil 3D

Ground surface (TIN)

A 3D model of bare earth with breaklines enforced at grade changes, in ground-scaled survey coordinates. This is the file designers build on.

DXF, GeoPackage

Contours

Lines of equal elevation, typically at 1 ft or 2 ft intervals, generated from the breakline-enforced surface.

GeoTIFF, JPEG2000

Orthophoto

A scaled, distortion-corrected aerial photo aligned to the same coordinates as your topography.

LAS, LAZ

Classified point cloud

The raw measurement: millions of 3D points sorted into ground and non-ground, ready for further analysis.

Starting point

From $3,995

LiDAR collection and processing for undeveloped sites up to 50 acres with up to a half day in the field.

Mobilization, built-feature mapping, and surveyor fees are additional. Surveyor services are quoted and billed by the surveyor.

Get your quote

Colorado work

From trailheads to ski slopes

Colorado projects similar to yours. The full portfolio lives on TopoMatters.com.

  • PlanningTrail corridor mappingTown of Parachute
  • ParksWhitewater park surveyBuena Vista
  • MountainSki terrain planning slope studyLoveland Ski Area
  • Community3D reality captureSummit County
  • CivilTransportation design surveyLoveland
  • CivilPedestrian crossings designDenver
  • CommunitySite development mappingGreen Mountain Falls
  • LandownerHomesite topographic mappingMt. Princeton

View the full portfolio

Questions

Common questions

What is a drone LiDAR survey?

A drone carries a laser scanner that measures distance to the ground hundreds of thousands of times per second. Combined with precise GPS positioning and ground control set by a surveyor, those measurements become a detailed 3D map of your terrain.

How accurate is it?

Accuracy depends on site conditions, vegetation, and control. Every project is checked against independent surveyed points, and the surveyor of responsible charge reviews the results before preparing your final deliverables.

Can my design be staked out from this data?

Yes. Your data is delivered in the project's ground-scaled survey coordinates, so the design built on it is in the same system your surveyor uses in the field. When it's time to build, it's construction layout ready.

I'm not a surveyor. Can I still order a LiDAR survey?

Yes. This service is built for you. A Colorado-licensed land surveyor from the partner network sets control, provides oversight, and stamps deliverables when your project needs it.

What does it cost?

For undeveloped sites up to 50 acres, LiDAR collection and processing starts at $3,995. Mobilization, built-feature mapping, and surveyor fees are additional. Larger sites, corridors, difficult access, tree canopy, and CAD drafting are scoped to your project, and surveyor services are quoted and billed by the surveyor.

More questions

Next step

Get answers about your site

Share a location and what you need to decide. You'll get a feasibility check, a scoped LiDAR quote, and help lining up a licensed surveyor if you need one.