← All guides

Planning · Topographic surveys

Drone LiDAR or a Traditional Topo Survey? How to Choose

If you've been told you need a "topo" before design can start, you have two broad options. A survey crew can walk your site with GPS and a total station, or a drone can scan it with LiDAR. Both produce a surface model and contours. They get there differently, and the right choice depends on your site.

How each method works

A conventional ground survey measures individual points. A crew chooses where to shoot, usually along grade breaks, at features, and on a rough grid in between. The surface is only as detailed as the number of shots, and every shot means someone walking to that spot.

A drone LiDAR survey measures everything in view. The scanner fires hundreds of thousands of pulses per second, and processing separates ground returns from vegetation and structures. Instead of a few hundred shots, you get millions of ground points, with breaklines pulled from that dense data.

Where LiDAR tends to win

  • Large or long sites. Corridors, trail systems, ranches, and multi-acre parcels take days on foot and hours by air.
  • Steep or hazardous terrain. Canyon slopes, highway cuts, river banks, and talus fields are captured without putting people on them.
  • Trees. Laser pulses slip through gaps in the canopy. In Colorado's ponderosa, aspen, and scrub oak, that's often the difference between guessing at the ground and measuring it.
  • Unknown future questions. The point cloud keeps everything, so you can answer new questions later without going back to the field.

Where a ground crew still matters

  • Hard, precise features. Pipe inverts, manhole rims, finished floor elevations, and crisp pavement edges are best measured directly.
  • Small, open sites. A quarter-acre lot with no trees may not justify a flight.
  • Boundaries. Property lines, monuments, and easements are always a licensed surveyor's job.

The best answer is often both

Good LiDAR projects already include ground work. A licensed surveyor sets control and collects independent check shots, which tie the data to your project's survey coordinates and verify its accuracy. Adding a handful of shots at critical hard features gives you the coverage of LiDAR and the precision of ground survey where it counts.

Questions to ask any provider

  1. Will the data be delivered in my project's ground-scaled survey coordinates, ready for construction layout?
  2. How is accuracy checked, and against what?
  3. Are breaklines enforced in the surface, or is it a smoothed grid?
  4. Who is the licensed surveyor responsible for the deliverable?

Ready to talk through your site? Send the location and what you're trying to decide.

Next step

Get answers about your site

Share a location and what you need to decide. You'll get a feasibility check, a scoped LiDAR quote, and help lining up a licensed surveyor if you need one.